Emergency Maritime Battery Charger

Boats and other watercrafts have emergency lifesaving equipment like strobe lamps to help rescuers locate individuals overboard in the event of a disaster. The battery life of the equipment is limited, so the amount of time rescuers have to find the victims is also limited. An emergency battery charger that can power emergency equipment is needed to remove this limitation.

Mobile Instrumentation for the Detection and Sampling of Aerosol Particles

Hazardous airborne particles pose a risk for health and safety in a variety of environments and thus detection of these small particles is essential. Current particle magnification systems are bulky and require a lot of power for operation, making them unsuitable to easily detect and analyze small particles in mobile and personal settings.

Adjustable Barricade Safety Rail System and Roof Bracket Assembly to Prevent Worker Falls

Falls are the leading cause of death in construction. In 2016, there were 370 fatal falls out of 991 construction fatalities (Bureau of Labor Statistics, Census of Fatal Occupational Injuries data). These deaths are preventable. According to the Occupational Safety and Health Administration, employers must set up the workplace to prevent employees from falling from overhead platforms, elevated work stations, or into holes in the floor and walls.

Methods for near real-time aerosol chemical analysis for environmental and occupational monitoring

­Exposures to hazardous airborne particles can pose a significant health risk to those routinely exposed in ambient air and industrial work environments. Measuring chemical composition and concentration of aerosol particles is important to preventing worker exposures and protecting health.

Wipes and Methods for Removal of Lead and Other Metal Contamination from Surfaces

Exposure to lead (Pb) has long posed serious health risks. Ingestion of lead from skin exposure can adversely impact every organ in the body; the kidneys, blood, nervous, and reproductive systems are most affected. Washing skin with soap and water is not sufficient to remove lead residues. To prevent adverse impacts from Pb exposure, exposed individuals need cleaning methods that will effectively remove Pb ions from the skin to less than the limit of identification (i.e., 10 µg or less).